Specific Aircraft
Masks that depict a specific aircraft, whether just the identifying markings, or the full meal deal.
71 files
-
(0 reviews)
0 comments
Submitted
-
F4U_corsair_white_122_48scale.lbrn2
By MiloMinder
F4U_corsair_white_122_48scale.lbrn2
not sure if the bomb markings are realisable for non-laser cutters, as the laser removes the "filling" of the bombs.
For better handling, the overall size is slightly larger than the decal. (abou 2,5 mm higher than the decal)
photos of the result will follow
6 downloads
(0 reviews)0 comments
Submitted
-
1_48_F4U_Corsair_white_122.svg
By MiloMinder
1_48_F4U_Corsair_white_122.svg
not sure if the bomb markings are realisable for non-laser cutters, as the laser removes the "filling" of the bombs.
For better handling, the overall size is slightly larger than the decal. (abou 2,5 mm higher than the decal)
photos of the result will follow
15 downloads
(0 reviews)0 comments
Submitted
-
USAAF-A36 APACHE-284063.studio3
By XvrBlmfls
A-36 Apache - 225 FB Squadron - 27th FB Group, Morocco 1943. Sized for Italeri / Accurate Miniatures
8 downloads
(0 reviews)0 comments
Submitted
-
(0 reviews)0 comments
Submitted
-
Fw-190A-6 Erwin Bacsila "White 7"
By Mozart
Quite tricky masks to both draw and use, the fist insignia needs to be built up in layers.
16 downloads
(0 reviews)0 comments
Submitted
-
Italeri32-wing-gloves.studio3
By MikeC
The 1/32 scale Italeri Tornado kits (at time of submission IDS, ECR and GR4 boxings) have a wing glove in a vinyl-like material to protect the slot the wings sweep back into. It occurred to me while building my GR4 that this would need masking for painting, so I knocked up these masks. The top one is for part 4J (port), under that 3J (starboard).
NB: I have tested these against the wing glove parts, but have not tested them yet on the assembled model. When I have I'll update them if need be.
0 downloads
(0 reviews)0 comments
Submitted
-
(0 reviews)0 comments
Submitted
-
Airfix Anson Gun Plate
By DBB
This gun plate was designed to cover the forward-facing .303 machine gun housing on the Airfix 1/48 scale Anson. I don't think the Anson trainers in Canada were armed, so here is my quick fix.
(Of course, after I drafted, printed, and attached my plate, I found a photo that shows a better representation than I originally built. (as seen in my primed fuselage half.)
The fix is easy though. Before printing, reduce the "X" and "Y" scale by 30%. Also - the thickness is very thin and fragile after curing, so do not reduce the "Z" scale at this time, rather, after it is printed, sand it as thin as you need.
OMG..... OR..... You could simply use part #17 ? IDK...
4 downloads
(0 reviews)0 comments
Updated
-
1/48 "Special Hobby" Airspeed Oxford wing walkway
By DBB
A pretty accurate mask (at least for my old tired eyes) for Cricket or Silhouette.
3 downloads
(0 reviews)0 comments
Updated
-
p-38_miss_virginia.dxf
By MiloMinder
Exportet as .dxf from Lightburn. I hope it´s usable for maybe other machines like plotters.
Just ignore the wavy outline of the "Miss Virginia"-Lettering, it comes out just fine, because of the small size.
6 downloads
(0 reviews)0 comments
Submitted
-
P-38_Miss_Virginia.svg
By MiloMinder
Exportet as .svg from Lightburn. I hope it´s usable for maybe other machines like plotters.
Just ignore the wavy outline of the "Miss Virginia"-Lettering, it comes out just fine, because of the small size.
7 downloads
(0 reviews)0 comments
Submitted
-
Miss_Virginia_48scale.lbrn2
By MiloMinder
Original Lightburn-File --> Ready to burn!
Just ignore the wavy outline of the "Miss Virginia"-Lettering, it comes out just fine, because of the small size.
4 downloads
(0 reviews)0 comments
Submitted
-
(0 reviews)0 comments
Updated
-
73 Sqn Hurri-e.studio3
By Mostly 48th
Colourful Hurricane for the new Revell 1/32 kit. based on a profile in the Airframe and miniatures monograph. 73 Sqn RAF BD930 "R". Tested on paint mule and squadron insignia worked well.
Enjoy!
John
28 downloads
- raf national marking
- huricane
- (and 2 more)
(0 reviews)0 comments
Submitted
-
Bf 109F-4 (Jabo) Unteroffizer Dr Felix Sauer, 10/JG53, Santo Pietro Airfield, Sicily 1942
By John
I used this project as a medium to learn how to use Silhouette Studio (and to replace the Bf 109E in the 1/48 Airfix Dogfight Double kit with a more factually accurate Bf 109F-4 that saw action over Malta).
I haven't cut it yet on my cameo, but the scalable vector maps should be usable for any masking between 1/48 and 1/32 scales.
Please check sizes are appropriate.
20 downloads
(0 reviews)0 comments
Updated
-
1/48 178TH FS F-16ADF North Dakota
By docdodj
Created a mask for the Vertical Tail that shows the pic of Teddy Roosevelt. This is for 1/48 scale, but I assume can be scaled to 1/32. A caveat is I haven't tested it yet
14 downloads
(0 reviews)0 comments
Submitted
-
Kotare Spitfire Mk. Ia Masks
By CB_357
Kotare Spitfire Mk. Ia Insignia Masks ... these have been drawn based on the kit's decal sheet (ie nothing has been traced). Obviously these haven't been tested (yet) but should hopefully give you guys a basis to move forward with and save you a bit of time
Working on the canopy masks, but that could take a bit more time
66 downloads
(0 reviews)0 comments
Submitted
-
ICM I-16 32001 Paint Masks for markings
There was no option for the USSR/VVS so I chose specific aircraft.
A quick scan and trace of the kit decals, I already cut them and it looks allright to me.
Enjoy!
19 downloads
(0 reviews)0 comments
Submitted
-
Ta 152 h Trimaster .studio3
By Wuger91
Hello,
Here is the Studio file for the Trimaster / Dragon /Italieri 1/48 Ta 152
19 downloads
(0 reviews)0 comments
Updated
-
Airfix 1:48 Avro Anson Mk1 markings
By Rapiud12
First post, please be gentle.
Just wanted to say hello and thanks for everyones hard work.
Only had my Portrait 3 for a week and have just made my first set of masks.... not used them yet.
Hopefully they are of some use to someone?
All the best David
22 downloads
(0 reviews)0 comments
Submitted
-
1/32 Hurricane Mk2C FM-E
By IainM
Masks for FM-E, a Hurricane Mk2c of 257 (Burma) Sqn, RAF, March 1942
17 downloads
(0 reviews)0 comments
Updated
-
-
ThunderboltMkII-79Sqn.studio3
By MikeC
KJ233/NV:G of 79 Sqn in Burma, seen at 2:55 in this short film: https://www.iwm.org.uk/collections/item/object/1060025281
Date? The latter part of 1944-1945, I can't be more precise than that at the moment.
Includes spares of all markings.
7 downloads
(0 reviews)0 comments
Submitted
-
MirIII Fin Flashes.studio3
By Peter White
1/32 Fin Flash for RAAF Mirage.
Just add SQN emblem into circle, or delete circle if not applicable.
Its my first attempt so might need a little clean up, but looks ok on the model.
enjoy,
Peter
3 downloads
(0 reviews)0 comments
Submitted