Specific Aircraft

combination of traced and   designed   scaled for 1/32  revell but would work for tamiya as well   see my   national insignia as well.  the upper two C and 5 are slightyly larger as seen on the  aircraft and meant to painted white  the square on the bottom is for the  natural metal area on the  port side where the info decal goes.   two ferensi mask are provided as  the aircraft was  only photographed from the  port side begging the question of  if it had it on the starboard side as well

This is my first attempt at making my own masks with a Cameo 4. I cut them onto Tamiya masking sheet, which seemed to work OK. In the photos which show the results on the 1/72 Academy Mustang, the insignia and squadron codes were painted using the masks that I'd made with the cutter. I'm fairly pleased with the result, however the roundels are a little wonky. The smaller serial numbers are decals, as the cutter couldn't cope with that small size with the Tamiya tape. I have some Artool Hobby Mask that I may try in the future for such small lettering.

This is a simple replacement for the "TH" option in the Tamiya 1/48 kit.
I'm about to use this mask on a live project...let's hope it all works out OK? 😄

Hello, my first contribution.
Best Regards
Michel
 

Walkway Stencil for Kitty Hawk 1/32 Mirage 2000C/N/D

Masks for iron crosses, MARINE lettering, code letters and MFG2 related insignia.

Insignia and code letters for an I-16 type 10.
Masks were adapted from ICM decals. The arrows in the falange will probably get butchered during cutting.
Use the surrounding as a negative mask

National Insignia and Unit Numbers for Phil Rasmussen's P-36, one of the few US aircraft that scored aerial victories at Pearl on 7 Dec 1941.  Based on the Special Hobby decal sheet.  This is a Silhouette Studio file, set up for a 9" x 7" (W x H) piece of masking material.  Includes masks for painting the wheels.

This is a full sheet of Ki-45 53rd Sentai markings including Hinomaru for fuselage and wings,as well as tail number and leading edge stripes

15.000th Curtiss P-40N, National Insignias

15.000th Curtiss P-40N, Curtiss-Wright logo

Fw 190D-9 „Blue 12“ 1:48

Messerschmitt Bf 109E-4,  Waldemar  Wübke, 9.JG5, France 194, 1:48

sized for the trumpeter 1/32 avenger kit

Adobe Illustrator

P-51B 20th FG OTU

Created in CorelDraw!. Moniker taken from attached photo.

Spitfire XII EB-D MB558

CAF B-29

This time in studio3 format.

From:
For F-18 (unscaled)
 
Silhouette Studio  4.4.247    (Business Edition)

Complete paint mask set for Hasegawa T-33A Shooting Star.
Scale: 1/72
Suggested material: Tamiya 87130 Masking Sheet

Complete paint mask set for Tarangus or Special Hobby single seat versions of SAAB Viggen.
Scale: 1/72
Suggested material: Tamiya 87130 Masking Sheet

Masks for ICM's 1/32 Gladiator as flown by 56 Squadron (possibly with chequerboard or not!)

Intended to be used with an Eduard Bf109E-1 plus the Alleycat conversion, although I guess other paths to this would do.
 
Günther Lützows '6-10' was delivered to Spain as an A type, but was later upgraded to a B type. Also it did go through a lot of marking changes, but I've done it as it was on April 6th 1937 when Lützow used this machine to score the first victory for the Bf109