Specific Aircraft

There was no option for the USSR/VVS so I chose specific aircraft.
 
A quick scan and trace of the kit decals, I already cut them and it looks allright to me.
 
Enjoy!

Hello,

Here is the Studio file for the Trimaster / Dragon /Italieri 1/48 Ta 152

First post, please be gentle. 
 
Just wanted to say hello and thanks for everyones hard work.
 
Only had my Portrait 3 for a week and have just made my first set of masks.... not used them yet.
 
Hopefully they are of some use to someone?
 
All the best David

Masks for FM-E, a Hurricane Mk2c of 257 (Burma) Sqn, RAF, March 1942

Hi,
 
From the Academy decal sheet.
 

KJ233/NV:G of 79 Sqn in Burma, seen at  2:55 in this short film:  https://www.iwm.org.uk/collections/item/object/1060025281
Date?  The latter part of 1944-1945, I can't be more precise than that at the moment.
 
Includes spares of all markings.

1/32 Fin Flash for RAAF Mirage.
 
Just add SQN emblem into circle, or delete circle if not applicable.
 
Its my first attempt so might need a little clean up, but looks ok on the model.
 
enjoy,
Peter

A simple replacement for the scheme in the Hobbyboss 1/48 kit as the decals in that box are out of proportion.
I'll be using this one over the next few days so hopefully it'll be appearing in the gallery soon. 😄

Silhouette File for a F-4B 151472 Modex 8 from VMFA-531 Grey Ghosts. My first attempt, only issue was the A and E in Marines for the font making extra cuts. So far, its been used it on my Tamiya F-4B for the tail, I'll be using the rest over the next few days.
File includes walkway masks and Bu No's.
 
Enjoy 😉

Hello,
With this file you may do the obly Rufe used by French Navy.... once, the plane crashed at first flight test.
 
Théo
 
 

General and individual markings for a 1/32 Buecker Bü 131 Jungmann.
Includes national insgnia in different versions, fuselage and wing codes.
As a bonus there's the emblem of NAGr.3 included. It's kinda hard to cut - I needed three attempts to get a good result.
I'd definitely recommend the slowest setting and active overcutting at corners.

Hello to all this is for revell phantom fgr the big decals that i am working now 

Follow up of the conversion file, this is one of the famous JG2's Eagle head scheme.
 

1/32 scale code letters and serials for Meteor F4 VT112/XL-S of 226 Operational Conversion Unit (OCU), RAF Bentwaters, post-WWII.  Designed for HKM kit.  Includes one or more spares of each code/code pair, and some strips to use for transfer tape a/r.

Canopy, wheel and position light masks.

Two sets of masks for 1/48 Mirage III by Eduard with corrected size.
Cheers from Rome!
 
Valerio.

Canopy masks for hasegawa 1/72 sr71 blackbird

Well, first try on my end to make masks on my projects.
 
Just thought could be useful for other folks...so here you have.
I just built them, tested the size and they fit. Tested the function and they work.
 
But the model is still under construction.
 
Includes seatbelts for the dorsal gunner...in case anyone wants o detail it.
 
Cheers,

Masks serial numbers, unit insignia and windows on ICM's 1/48th A-26C, for aircraft #322616 of the 573rd BS, 391st BG, 9th AF.

Patterns for a 1/48th P-47D Thunderbolt of the 324th FG

Hi
The 1/48 kinetic kit is quite good, but the decals have wrong colours and the font is not totally correct either.
In this file you will have main markings for aircraft n°41, and 2 types of anchor for the cockade.
 
Cheers.
 

These masks were drawn from the Tamiya instructions for their Mk IX Spitfire but are probably useable on many types as a generic scheme.  Please note, I drew these for my own use, they are not perfect and not professionally produced so will probably need "tweaking" if you decide to use them.  The screenshots show location of the camouflage sections, it presumes that a base coat of Ocean Grey has been applied so these allow for Dark Green only.
 
UPDATE 26/3/21  I've amended the file for the fuselage; on fitting the masks to my model I found that I had omitted to provide a mask for the port side above the tailplane, this is now included and positioned on the sheet in the bottom right hand corner.  Also amended are the engine panels, the original versions were too high.
UPDATE 27/3/21  Another amendment, the fin flashes were slightly too large but have been altered to fit.  I've also added the mask for the upper engine panel, shown on the sheet as "Nose".
Max

F-105D from Lt Waldrop
Roundels and bomb stripes are also provided

Werner Voss - Corrected Cowl Face, suitable and fitted for the new Meng DR.1 / F.1 kit.   The pic is already in Studio.3 file format, and can have the individual eye/brow/mustache features separated for better fit. 

Here is my second attempt at making masks for the current model I'm working on. Just sprayed this afternoon, took the masks off and it looks good!
I've included extras, made them just in case I messed up some....but struck it lucky, luckily!!😅
I used Oramask 810 for the masks, settings were Force10, Speed 5 and Depth 2 (Autoblade) Came out just fine, masking sheet was transferred to the cutting mat for the cutting process