dashotgun
-
Posts
33 -
Joined
-
Last visited
-
Days Won
16
Content Type
Profiles
Forums
Events
Downloads
Posts posted by dashotgun
-
-
as stated above needed
-
ferensi 1/32 mustang
combination of traced and designed scaled for 1/32 revell but would work for tamiya as well see my national insignia as well. the upper two C and 5 are slightyly larger as seen on the aircraft and meant to painted white the square on the bottom is for the natural metal area on the port side where the info decal goes. two ferensi mask are provided as the aircraft was only photographed from the port side begging the question of if it had it on the starboard side as well
-
Submitter
-
Submitted02/14/2021
-
Category
- 1
-
-
usaf mustang stars
View File
these are for revell mustang but could be used for the tamiya traced off off of the cutting edge decals for Fernesi
-
Submitter
-
Submitted02/14/2021
-
Category
- 2
-
-
well it would be a series of very small boxes so not lines
-
can't get the sizes for 1/32 or how to weld it thanks. ushci makes a set but would rather diy
-
yes the autoblade is back ordered everywhere.
-
-
what do you use as a transfer tape?
-
21 hours ago, denders said:
I have 813 and 810, while I'm working on my first canopy mask I'm noticing that the adhesive on the 813 is a bit stickier and 813 seems to be a little stiffer.
i now have both and agree with the above I ordered 810 and received the 813. the store told me to keep it and sent the proper 810. I have used the 813 it will stand up to typical enamel point solvent but it is useful where you are only applying to a flat surface. I use montex masks and sure enough that is 810. FWIW there is a steep learning curve with the included software
-
it is for a cricut but fits cameo and it supposed to be better at small intricate cuts
-
mud splatter useful on both aircraft or vehicles
hope this is useful
-
Submitter
-
Submitted12/07/2020
-
Category
- 1
-
-
these were not my masks they predated my cameo except for the ac id numbers they came from montex. I did make the stripe mask as well, The model is almost done it has been ignored for a about 1.5 years sadly. I did lose the direction finding antenna after the pictures were done. Trumpeter is not very good about replacing parts so I made the mount via sculpy clay and the antenna will be from strip styrene or a some scap PE.
- 2
-
-
agree with above the tracing does not always work well but he letters can be d/l as fonts or are already here on the site
- 1
-
fw 190 exhaust trim
View File
this is the white flash around the black exhaust trim seen on many FW 190 traced from the cutting edge decal sheet originally in 1/32 will need to be resized to your purpose
-
Submitter
-
Submitted11/29/2020
-
Category
- 1
-
-
I just got the 810 they promised me it is thinner and more supple then the 813 I think the 810 conforms better.
- 2
-
- 8
-
-
good to know it does seem thicker as well
- 1
-
I have used the role holder it worked fine but as stated I think given that we are cutting small masks rather then large projects seems better to just use the matt and small pieces. I just asked a question about the 813. do you use water color paint as the 810 is suggested for solvent type paints. I ended up ordering 810 but they sent 813 they are going to send me some 810 so now will have both.
- 1
-
I ordered 810 and they sent 813 they are going to be sending me the 810 and told me to keep the 813. My understanding is that 810 is more solvent capable and 513 is more for water based paint. Since i use enamels and lacquer paint. I prefer the 810 but giving how little solvent is in an airbrush has anyone used 813 and not had the mask dissolve? I can experiment to see if no one else has ever used it
-
dixie art is a a bit less expensive then coastairbrush btw I have used both of them in the past
-
okay there is 810 and 811 and 813, amazon only carries 813 which is best for our purposes
edit answered my own 810 is for solvent based paint the others are for water based paint. I also found arttool ultra mask which has been recomended by others
- 2
-
this looks good to me
https://www.swingdesign.com/products/silhouette-cameo-4 277 with free shipping
also found the basic model at michaels a craft store for 20% off so about 250 before tax. the autoblades are sold out around the country strangely enough but they are only about 10 bucks at michaels so after the holiday I will pick up a spare
btw beautiful model \
- 1
request canopy masks for a bf 109 with the galland hood
in Canopy Masks
Posted
made my own will post them up