Aircraft - Military

Codes-RAF I saw a thread on LSP recently, in which the OP described the difficulties with installing certain fonts, which are recognised by MS WOrd and other software, but not picked up by the Silhouette Studio software. The process the poster described was basically the one I used: Type up the lettering you want in MS Word, scan it in, and manipulate it until you have your codes in your studio 3 file. What a bother! But there is no way round it. However, the thread reminded me that I had created this file, but not uploaded it here. SO better late than never, here it is. It contains all the letters and numerals in two of the most common font…

1/48 Eduard Bf 109F-4 Canopy Mask 1/48 Bf-109f-4 canopy mask for Eduard kit. Before cutting make sure the width is 1.242in and the height is 2.210in. If need to re scale make sure the height and width are correct first. Cheers! File Information Submitter hank1011111 Submitted 04/22/2026 Category Specific Aircraft View File

View File Regia Aeronautica 1940 – 1943 white Regia Aeronautica 1940 – 1943 Submitter Mr. PLOTTER Submitted 11/30/2020 Category Italy - All Eras

1-48 f4f-4 tamiya insignia camo.studio3 1-48 f4f-4 tamiya insignia camo.studio3 Hi there, insignia, numbering and camo for the Tamiya 1/48 F4F-4, white 28 on Guadalcanal numbering created with USN font then converted to path so I believe shouldn't be a problem if you dont have the font installed rest traced from instructions some spares and always recommend to do your own dimension checks File Information Submitter talbot Submitted 02/21/2026 Category U.S. - WW2 View File

SBD Dick Best Rev 20250103 Stencils for the 1/48 Monogram SBD. The letter font is USN_Stencil. File Information Submitter PinehillJoe Submitted 02/15/2026 Category Aircraft - Military View File

1/32 Spitfire Mk.I PR Type A Roundels Set of masks for roundels and camera apertures for Kotare's 1/32 scale Spitfire Mk.I PR Type A. Nothing too fancy, I just copied the dimensions of the kit decals. This file contains roundels for both marking options in the kit, as well as masks for the two camera apertures, one in each wing. A note - the kit instructions tell you to drill a 5mm hole for the lenses - dont! Use a file and carefully ream out the hole, test fitting the lens until it's a friction fit. 5mm seems too large, I think mine is 4.65mm, I have made the aperture masks to fit my hole. Your mileage may vary! File Information Sub…

1/32 -Messerschmitt Bf 109G-10 Erla -11. /JG 300, Prag – Kbely, CZ, Mai 1945 The insignia were modeled after the new Revell kit 03752. This specific Messerschmitt Bf 109G-10 (Erla design) belonged to the 11th Squadron of Jagdgeschwader 300 and was found abandoned at Prag-Kbely (Gbel) airfield in May 1945, after the end of the war. I created the file in .svg and .studio3 formats. Have fun building it! Harry File Information Submitter Timbacat Submitted 02/02/2026 Category Luftwaffe - WW2 View File

Bf109K-4 White 5 Hi all Kotare Bf109K-4 "White 5" 1./NJG11 1/32 masks - national and aircraft number for a Bf109K-4 from 1./NJG11 "White 5". Original decal sheet was from AML File Information Submitter IainM Submitted 02/01/2026 Category Specific Aircraft View File

Hawker Typhoon 183 Squadron R8884 These are the masks designed for the Airscale Hawker Typhoon R8884 TF-L of 183 Squadron. The markings are specifically as applied during Exercise Spartan and include the white identifying stripe along the nose. Also masks for wheel centres and wing walkways. File Information Submitter Mozart Submitted 11/27/2025 Category Specific Aircraft View File

Airscale Typhoon camo wings.studio3 Airscale Typhoon camo wings.studio3 File Information Submitter Mozart Submitted 01/23/2026 Category Camouflage Patterns View File

Airscale Typhoon fuse port.studio3 Airscale Typhoon fuse port.studio3 File Information Submitter Mozart Submitted 01/23/2026 Category Camouflage Patterns View File

1/48 SB2C Helldiver My first go at making a stencil. I've started the old Monogram 1/48 SB2C Helldiver. I am waiting for my cutter to arrive, and played with the Silhouette software. If anyone see errors or flaws, please let me know. File Information Submitter PinehillJoe Submitted 12/26/2025 Category U.S. - WW2 View File

Hi guys, Looking for Luftwaffe Werknummer files - does anyone have them? I have had a trawl around and surprisingly can't see any...lots of crosses, swastikas and chevrons etc Ideally looking for a choice of both 'split stencil' style and regular solid numbers, since I'm not sure what type (Bf109 G-10 "Gigi") had, plus I'm sure that both sorts will no doubt come in useful down the line... Any help / pointers much appreciated Nick

P-47 Tamiya wheel well mask For masking the main landing wheel wells is they are to be painted after airframe painting. File Information Submitter craig b Submitted 11/27/2025 Category Specific Aircraft View File

For masking if your choosing to paint main landing gear wheel wells after the airframe is painted. Could also be used if you wanted to cut foam blocks and install them to hide the painted wheel wells. Will work with either Bubbletop or Razorback versions of Tamiya's kit

Hawker Typhoon 197 Squadron JP843 These are the masks designed for the Airscale Hawker Typhoon JP843 OV-T of 197 Squadron. The masks include the underwing identification stripes, wheel centres, wing walkways and the aircraft letter (T in this case) worn by most 197 Squadron Typhoons on the leading edge of the wing inboard of the inner cannon. File Information Submitter Mozart Submitted 11/27/2025 Category Specific Aircraft View File

Tamiya Spitfire Mk IX wing masks This file complements the masks for the fuselage that I uploaded some time ago. File Information Submitter Mozart Submitted 11/06/2025 Category Aircraft - Military View File

View File Camouflage and insignia masks for Mk IX Spitfire These masks were drawn from the Tamiya instructions for their Mk IX Spitfire but are probably useable on many types as a generic scheme. Please note, I drew these for my own use, they are not perfect and not professionally produced so will probably need "tweaking" if you decide to use them. The screenshots show location of the camouflage sections, it presumes that a base coat of Ocean Grey has been applied so these allow for Dark Green only. UPDATE 26/3/21 I've amended the file for the fuselage; on fitting the masks to my model I found that I had omitted to provide a …

1/48 - Markings from a Grumman F4F-3 - Capt. Carey, John F. - VMF-221 - Battle of Midway, June 1942 Hi guys, here's a marking for a Grumman F4F-3 of Capt. Carey, John F. - VMF-221 - Battle of Midway, June 1942 in 1/48 scale Have fun building! Harry P.S.: Please don't forget to leave a small donation for Kev and this great site!! You can donate to this great site using the following link: https://www.paypal.com/donate/?hosted_button_id=4F8UANDQKKFR4 File Information Submitter Timbacat Submitted 11/03/2025 Category U.S. - WW2 View File

Deutsche Luftwaffe Here I have Luftwaffe letters and numbers from World War II, with and without borders, in the correct format. The black characters are shown as written for character spacing. The yellow characters have the borders typical of the Luftwaffe at that time. The blue characters have no borders. The yellow and blue characters are all individual so you can place them as you need them. The size is also adjustable for the appropriate scale. Don't worry about the colors; they are for illustrative purposes only and do not interfere with the plotter cutting process. Have fun using the templates! Harry P.S.: Please don't forget to leave a small donation for Ke…

Bf-109G-4 JG 53 .studio3 This is my latest offering a Messerschmitt Bf-109 G-4 of 4/JG53 based in Tunisia in 1943. I used the profile in the 1/72 scale Eduard kit instructions as inspirations although all the makings here are drawn by me. It is option I here https://eduard-cdn.oxyshop.cloud/out/media/2112.pdf The Eduard 1/72 scale kits are fantastic too btw. I found the easiest way to do the national makings is to paint the areas to me maked white first then fit the white masks and paint the black areas. Finally cover the makings with a "coverall" mask and paint the camouflage. There are a few shots showing the nose insignia process. The dotted lines are for the wing…

Tamiya 61115 - Ki-61-Id Hien (Tony) Camouflage - 1/48 Tamiya 61115 - Ki-61-Id Hien (Tony) Camouflage - 1/48 I recommend using thin cardboard or paper for cutting to create a smooth color gradient. If you want a hard color edge, use film, of course. The file names are self-explanatory. Have fun modeling! Harry File Information Submitter Timbacat Submitted 08/12/2025 Category Camouflage Patterns View File

Hurricane Mk.I - Camouflage A and B - 1/72 Hurricane Mk.I - Camouflage A and B - 1/72 Camouflage pattern based on a template from Arma Hobby in 1/72 scale. Source: Arma Hobby MASKS FOR HURRICANE MODELS PATTERN A AND B Posted by Marcin Ciepierski | 03/01/2019 | Arma Hobby kits, Blog, Modeling advise Have fun crafting. Harry File Information Submitter Timbacat Submitted 07/25/2025 Category Camouflage Patterns View File

I've been approached by the former owner and pilot of the Hawker Hunter "Miss Demeanour" to build him a replica of the aircraft in 1:48 for a trophy. The long and short of it is, I need some custom masks cutting for the star patterns. Does anyone know of anyone who's doing this, 1ManArmy excepted, I've spoken with Sven and he's flat out. Any contacts gratefully received,thanks

P-47D Thunderbolt - Francis Stanley "Gabby" Gabreski Hallo, 1/48 P-47D Thunderbolt - Francis Stanley „Gabby“ Gabreski Keine Abschussmarkierungen, da diese zu klein sind um sie vernüftig zu plotten. Leider ohne Camouflage, da ich noch keinen guten Weg gefunden habe, um diese spezielle Tarnung zu plotten. Gruß Harry File Information Submitter Timbacat Submitted 06/06/2025 Category U.S. - WW2 View File