RadBaron Posted September 17, 2020 Share Posted September 17, 2020 Finally got a new toy! I'd been using my previous workplace's Cameo 3, so I'm excited to learn what more capabilities the 4 has! First job: markings for a 1/48 Percival Provost! Denzil 5 Quote Link to comment Share on other sites More sharing options...
Kevin Futter Posted September 17, 2020 Share Posted September 17, 2020 Wow, Midnight Black Edition! Congrats, Denzil. I considered one of these when I was deciding to purchase, but opted for the Portrait instead. Please give us a summary of your thoughts about it when you can. Kev 2 Quote Link to comment Share on other sites More sharing options...
Mozart Posted September 18, 2020 Share Posted September 18, 2020 Good luck Denzil, have fun and give us some feedback. 2 Quote Link to comment Share on other sites More sharing options...
RadBaron Posted September 18, 2020 Author Share Posted September 18, 2020 23 hours ago, Kevin Futter said: I considered one of these when I was deciding to purchase, but opted for the Portrait instead. What were your considerations, Kev? I picked the cameo purely because I was familiar with the precious model and figured this one would be similar, if slightly better than the 3 I was using. 13 hours ago, Mozart said: give us some feedback. Will do! I'm at early stages in terms of what the thing can do. Sofar I can draw and cut stickers and masks. Id like to learn what other materials are feasible and what fancy things the drawing software can do. ALL suggestions are welcomed! Cheers, Denzil 1 Quote Link to comment Share on other sites More sharing options...
Kevin Futter Posted September 18, 2020 Share Posted September 18, 2020 1 hour ago, RadBaron said: What were your considerations, Kev? Price, mainly. I seem to remember that the extra features of the Cameo weren't compelling enough to justify the extra cost to me, especially as a complete beginner. The smaller footprint of the Portrait was also a consideration, given how little room I have. Kev 2 Quote Link to comment Share on other sites More sharing options...
Mozart Posted September 19, 2020 Share Posted September 19, 2020 I did a little experiment a couple of weeks ago with my Echelon Lightning, I wanted to make a bit more variation in finish etc so decided to feature the "elephant ear" panels just aft of the cockpit. I traced the outline from the model onto thin paper, scanned this and uploaded into Silhouette then cut the panels out using Bare Metal Foil, which is extremely thin! It took a few attempts to get the shape and settings right, but it worked very successfully. I'm really excited about this because with models such as the beautiful Hawker Fury, Hart, Demon etc to build the technique opens up a whole new range of possibilities. Max 4 Quote Link to comment Share on other sites More sharing options...
Kevin Futter Posted September 19, 2020 Share Posted September 19, 2020 Excellent experimentation, Max! I really would have thought that Bare Metal Foil was too thin to cut with one of these devices, but being able to certainly opens up a lot of possibilities! Kev 2 Quote Link to comment Share on other sites More sharing options...
Mozart Posted September 20, 2020 Share Posted September 20, 2020 (edited) 15 hours ago, Kevin Futter said: Excellent experimentation, Max! I really would have thought that Bare Metal Foil was too thin to cut with one of these devices, but being able to certainly opens up a lot of possibilities! Kev I was pleasantly surprised too Kev, I expected the foil to be chewed up, but it even managed to cut the 1mm circles quite effectively. I can't recall the exact settings so I'll have to do a reprise! 😃 Edited September 20, 2020 by Mozart 1 Quote Link to comment Share on other sites More sharing options...
RadBaron Posted September 22, 2020 Author Share Posted September 22, 2020 (edited) That's brilliant, Max! I've often used bare metal foil to make raised panels stiffeners, but struggled with the usual issues of making identical shapes etc. This'll make short work of them! Edited September 22, 2020 by RadBaron Quote Link to comment Share on other sites More sharing options...
mark13 Posted October 2, 2020 Share Posted October 2, 2020 nice i just orderd mine with a nice discount now waiting for the mailman Mark 3 Quote Link to comment Share on other sites More sharing options...
BlueNosers352nd Posted October 8, 2020 Share Posted October 8, 2020 What Blade(s) should be looking at? Might pull the trigger this month. 1 Quote Link to comment Share on other sites More sharing options...
Mozart Posted October 27, 2020 Share Posted October 27, 2020 On 10/8/2020 at 8:45 PM, BlueNosers352nd said: What Blade(s) should be looking at? Might pull the trigger this month. The standard blade supplied with the machine is adequate for the vast majority of jobs. I bought the heavier duty blade for cutting thicker plastic but I haven't really tried it out properly yet. 1 1 Quote Link to comment Share on other sites More sharing options...
dashotgun Posted November 12, 2020 Share Posted November 12, 2020 I am toying with getting one as well what about the soft ware included with it? Do the bundled packages worth it as well they include a lot of things I do not think i would need though 1 Quote Link to comment Share on other sites More sharing options...
Mozart Posted November 13, 2020 Share Posted November 13, 2020 From a modelling perspective, the basic software enables you to draw straightforward designs for masks such as roundels, crosses, stars etc as well as letters, but the real game changer is the Designer software which is an add-on package, not expensive, but so worthwhile. With this package you can import photographs for instance and trace around shapes, this opens up so many other possibilities. Yes, there is a whole library of designs that I’ve never used because they are intended for people who make cards, for scrap-bookers etc. but the tools (draw, copy, paste, orientate, scale, delete, group/ungroup etc) that are used for any craft remain the same. You’ll never regret buying one and investing in some time to learn how to use it. Max 1 Quote Link to comment Share on other sites More sharing options...
Kevin Futter Posted November 13, 2020 Share Posted November 13, 2020 12 hours ago, Mozart said: From a modelling perspective, the basic software enables you to draw straightforward designs for masks such as roundels, crosses, stars etc as well as letters, but the real game changer is the Designer software which is an add-on package, not expensive, but so worthwhile. With this package you can import photographs for instance and trace around shapes, this opens up so many other possibilities. It's odd that you say that, Max, as I only have the Basic version (am yet to upgrade), but I was still able to import an image and auto-trace it. Perhaps they've beefed up the Basic version? Kev 2 Quote Link to comment Share on other sites More sharing options...
Mozart Posted November 13, 2020 Share Posted November 13, 2020 Perhaps they have Kev, I’m pretty sure my Cameo 3 didn’t have those features before I had the Designer upgrade, but good on Silhouette if they have incorporated it! 2 Quote Link to comment Share on other sites More sharing options...
dashotgun Posted November 15, 2020 Share Posted November 15, 2020 so what else is needed besides the vinyl to cut if you buy the basic machine besides the software. Does it come with a cutting matt? any other blades or tools? The bundles include a lot of extraneous crap I think. With black friday coming inquiring mines and all that 1 Quote Link to comment Share on other sites More sharing options...
RadBaron Posted November 16, 2020 Author Share Posted November 16, 2020 (edited) 8 hours ago, dashotgun said: so what else is needed besides the vinyl to cut if you buy the basic machine besides the software. Does it come with a cutting matt? any other blades or tools? The bundles include a lot of extraneous crap I think. With black friday coming inquiring mines and all that Find a bundle deal with the cutting mat and maybe some extra blades. The standard auto blade is more than enough to cut masks. Oracal masking film is a commonly used masking film and at $20 for a 25ft roll, is great bang for your buck. As always, i'm open to suggestion for better alternatives! The supplied free factory software does now include drawing tools like the "Trace " function. Its actually fairly comprehensive. The software is easy enough to use, and there are countless video tutorials online. Dont limit yourself to just watching modelling tutorials. Take the time to experiment and play around with it. The vinyl and masking film is relatively cheap, so making a mistake is an inexpensive learning tool. Edited November 16, 2020 by RadBaron 2 Quote Link to comment Share on other sites More sharing options...
RadBaron Posted November 16, 2020 Author Share Posted November 16, 2020 And for an update on my original post, heres the Percival Provost. Roundels, finflash and codes were masked and painted. 5 Quote Link to comment Share on other sites More sharing options...
dashotgun Posted November 16, 2020 Share Posted November 16, 2020 (edited) this looks good to me https://www.swingdesign.com/products/silhouette-cameo-4 277 with free shipping also found the basic model at michaels a craft store for 20% off so about 250 before tax. the autoblades are sold out around the country strangely enough but they are only about 10 bucks at michaels so after the holiday I will pick up a spare btw beautiful model \ Edited November 16, 2020 by dashotgun 1 Quote Link to comment Share on other sites More sharing options...
RadBaron Posted November 17, 2020 Author Share Posted November 17, 2020 On 11/16/2020 at 8:26 AM, dashotgun said: this looks good to me https://www.swingdesign.com/products/silhouette-cameo-4 277 with free shipping also found the basic model at michaels a craft store for 20% off so about 250 before tax. the autoblades are sold out around the country strangely enough but they are only about 10 bucks at michaels so after the holiday I will pick up a Great deals!! All the extras are easily availiable from many sources, so whatever you buy, you'll be able to piece together the things you actually WANT 😀 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.