Red Dog
-
Posts
8 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Events
Downloads
Posts posted by Red Dog
-
-
Perfect, got it printed Gene.
I knew about the colours already, the line thickness setting escaped me.
I guess I'm too used to WYSIWYG 🙂
- 1
-
1/32 A-10C engine latches
Here is a studio file to replace A-10 engine latches.
It's not meant to cut as masks but to cut material.
Scaled for 1/32 - meant to be used with 0.3mm styrene sheet
Red for engraving, blue for cutting.
Ignore the green layer
-
Submitter
-
Submitted03/29/2023
-
Category
- 1
-
-
Thank you Gene,
I'll try that right away.
Much appreciated
- 1
-
Thank you gents
-
Have a silhouette Cameo 4 and I cut masks for my models but my knowledge of the process is very limited.
Looking forward to learn tips and tricks and get better with the software and cutting- 2
-
Hello gents,
I'm struggling with a basic function i can't get to work.
Often i want to print my design files from the silhouette studio software before cutting. But when I print I always get a blank page no matter what's on the studio file.I must be missing something stupid?
Thanks
1/32 A-10C engine latches
in Non-Mask Applications
Posted
Warm air can be 5° if the air it replaces is -12°C 🙂
You are right that the details might be better but that's mostly due to my lack of experience working with the cameo.
If the engraved rivets would clear a bit more the cut lines the parts would be way better
Still the stuff it replaces is really bad so I can live with 5° good 🙂
I often cut 0.3mm styrene sheet with the cameo. It's probably extra wear on the blade but I actually never go through on purpose.
I finish the cut by sanding from the rear face which provides the benefit to thin even more the styrene.
Apologies if the file is misplaced. Feel free to move it around as I thought there was one unique download section.