AlbertD Posted October 25, 2020 Share Posted October 25, 2020 I've been playing with creating files in Design CAD which I am familiar with and saving them as JPG files. They seem to open up and work just fine in the Silouette software. It's pretty easy to scan and trace in Design CAD so it should be pretty easy to convert a decal sheet. Is it OK to use files converted from decal sheets here? I don't want to have any copyright problem's. I wanted to try to do some off a P-40 decal sheet with a good old shark mouth. Quote Link to comment Share on other sites More sharing options...
Kevin Futter Posted October 26, 2020 Share Posted October 26, 2020 For personal use, you can pretty much do whatever you want. But I'd say if you've scanned a commercial decal sheet and turned it into a cutting file for masks, then it's probably best not to upload it here. If you've used it as the basis for a custom design, or used just a specific element on the sheet (like the shark mouth that you mentioned), then you can probably get away with it. Kev 2 Quote Link to comment Share on other sites More sharing options...
AlbertD Posted October 26, 2020 Author Share Posted October 26, 2020 28 minutes ago, Kevin Futter said: For personal use, you can pretty much do whatever you want. But I'd say if you've scanned a commercial decal sheet and turned it into a cutting file for masks, then it's probably best not to upload it here. If you've used it as the basis for a custom design, or used just a specific element on the sheet (like the shark mouth that you mentioned), then you can probably get away with it. Kev Thanks Kevin. I'll keep that in mind. I don't want to cause any problems with the forum but I would like to contribute if I can. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.