Specific Aircraft
Masks that depict a specific aircraft, whether just the identifying markings, or the full meal deal.
66 files
-
Camouflage and insignia masks for Mk IX Spitfire
By Mozart
These masks were drawn from the Tamiya instructions for their Mk IX Spitfire but are probably useable on many types as a generic scheme. Please note, I drew these for my own use, they are not perfect and not professionally produced so will probably need "tweaking" if you decide to use them. The screenshots show location of the camouflage sections, it presumes that a base coat of Ocean Grey has been applied so these allow for Dark Green only.
UPDATE 26/3/21 I've amended the file for the fuselage; on fitting the masks to my model I found that I had omitted to provide a mask for the port side above the tailplane, this is now included and positioned on the sheet in the bottom right hand corner. Also amended are the engine panels, the original versions were too high.
UPDATE 27/3/21 Another amendment, the fin flashes were slightly too large but have been altered to fit. I've also added the mask for the upper engine panel, shown on the sheet as "Nose".
Max
250 downloads
(1 review)0 comments
Updated
-
1/48 P-47D, 324th FG
By Pete_TW
Patterns for a 1/48th P-47D Thunderbolt of the 324th FG
60 downloads
(0 reviews)0 comments
Submitted
-
1/32 F-105D "Hanoi Special"
By Rom1
F-105D from Lt Waldrop
Roundels and bomb stripes are also provided
58 downloads
(0 reviews)0 comments
Updated
-
(0 reviews)
0 comments
Submitted
-
Kotare Spitfire Mk. Ia Masks
By CB_357
Kotare Spitfire Mk. Ia Insignia Masks ... these have been drawn based on the kit's decal sheet (ie nothing has been traced). Obviously these haven't been tested (yet) but should hopefully give you guys a basis to move forward with and save you a bit of time
Working on the canopy masks, but that could take a bit more time
47 downloads
(0 reviews)0 comments
Submitted
-
Eduard Mirage III Canopy, Panels (for Natural Metal Finish), intakes & chevrons masks
Two sets of masks for 1/48 Mirage III by Eduard with corrected size.
Cheers from Rome!
Valerio.
46 downloads
(0 reviews)0 comments
Submitted
-
(0 reviews)0 comments
Submitted
-
Tempest codes and roundels
By airte974
codes and roundels for Tempest 1/32 - W2OX - EJ705
41 downloads
(0 reviews)0 comments
Submitted
-
(0 reviews)0 comments
Updated
-
1/48 Heinkel He 219A-7 Tamiya replacement masks.
By Steve Evans
This is a simple replacement for the "TH" option in the Tamiya 1/48 kit.
I'm about to use this mask on a live project...let's hope it all works out OK? 😄
37 downloads
(0 reviews)0 comments
Updated
-
(0 reviews)0 comments
Updated
-
Messerschmitt Bf 109E-4, Waldemar Wübke, 9.JG5, France 194, 1:48
By Mr. PLOTTER
Messerschmitt Bf 109E-4, Waldemar Wübke, 9.JG5, France 194, 1:48
30 downloads
(0 reviews)0 comments
Submitted
-
1/32 Bf109G-6AS or G-14AS "White 7" NJG11
By IainM
Here is my second attempt at making masks for the current model I'm working on. Just sprayed this afternoon, took the masks off and it looks good!
I've included extras, made them just in case I messed up some....but struck it lucky, luckily!!😅
I used Oramask 810 for the masks, settings were Force10, Speed 5 and Depth 2 (Autoblade) Came out just fine, masking sheet was transferred to the cutting mat for the cutting process
30 downloads
(0 reviews)0 comments
Submitted
-
-
VMFA-531 F-4B 1:48
By Greg B
Silhouette File for a F-4B 151472 Modex 8 from VMFA-531 Grey Ghosts. My first attempt, only issue was the A and E in Marines for the font making extra cuts. So far, its been used it on my Tamiya F-4B for the tail, I'll be using the rest over the next few days.
File includes walkway masks and Bu No's.
Enjoy 😉
28 downloads
-
441 Squadron Mustang
By Tom Doolie
This is my first attempt at making my own masks with a Cameo 4. I cut them onto Tamiya masking sheet, which seemed to work OK. In the photos which show the results on the 1/72 Academy Mustang, the insignia and squadron codes were painted using the masks that I'd made with the cutter. I'm fairly pleased with the result, however the roundels are a little wonky. The smaller serial numbers are decals, as the cutter couldn't cope with that small size with the Tamiya tape. I have some Artool Hobby Mask that I may try in the future for such small lettering.
27 downloads
(0 reviews)0 comments
Submitted
-
Bf109A(B) '6-10' Legion Condor Günther Lützow
By Thomas Lund
Intended to be used with an Eduard Bf109E-1 plus the Alleycat conversion, although I guess other paths to this would do.
Günther Lützows '6-10' was delivered to Spain as an A type, but was later upgraded to a B type. Also it did go through a lot of marking changes, but I've done it as it was on April 6th 1937 when Lützow used this machine to score the first victory for the Bf109
26 downloads
(0 reviews)0 comments
Updated
-
Gloster Gladiator 56 Squadron
By Mozart
Masks for ICM's 1/32 Gladiator as flown by 56 Squadron (possibly with chequerboard or not!)
26 downloads
(0 reviews)0 comments
Updated
-
SAAB JA37 Viggen 1/72 Mask set
Complete paint mask set for Tarangus or Special Hobby single seat versions of SAAB Viggen.
Scale: 1/72
Suggested material: Tamiya 87130 Masking Sheet
26 downloads
(0 reviews)0 comments
Submitted
-
Blue Angels F-18
By RD2484
From:
For F-18 (unscaled)
Silhouette Studio 4.4.247 (Business Edition)
26 downloads
(0 reviews)0 comments
Updated
-
P-51A 1st ACG "Carol's Daddy"
By RD2484
Created in CorelDraw!. Moniker taken from attached photo.
26 downloads
(0 reviews)0 comments
Updated
-
F-104 Starfighter masks for 1/72 Hasegawa kit
By Hoops
Canopy, wheel and position light masks.
25 downloads
(0 reviews)0 comments
Submitted
-
(0 reviews)0 comments
Updated
-
Ki-45 - 53rd Sentai Markings
By Out2gtcha
This is a full sheet of Ki-45 53rd Sentai markings including Hinomaru for fuselage and wings,as well as tail number and leading edge stripes
23 downloads
(0 reviews)0 comments
Submitted
-
Mirage 2000 Walkway Stencil
By Cheetah11
Walkway Stencil for Kitty Hawk 1/32 Mirage 2000C/N/D
23 downloads
(0 reviews)0 comments
Submitted