Canopy Masks

29 files

1. 

   1/32 Bf110 Canopy masks

   By IainM

   Hi all
   Made up some masks for the Dragon 1/32 Bf110. These should work on a C/D/E/F kit, and if you have a G kit, this will do from the armored windscreen all the way through to the Bordfünker position. The masks might need very minute adjustments to scale, check your fit first. Oramask or something like that is great for straight pieces, you'll probably need to cut on Kabuki for the curved pieces, Oramask tends to lift away quickly on concave or convex pieces.
   

   28 downloads

      (0 reviews)

   0 comments

   Submitted June 7, 2021

2. 

   1/72 Hasegawa F-104 Canopy and Wheel Masks, .svg Format

   By Hoops

   Uploading in the canopy mask in .svg Format
    
   Cheers,
   Hoops
   

   15 downloads

      (0 reviews)

   0 comments

   Submitted October 3, 2021

3. 

   1/72 Hasegawa Harrier GR.3 Canopy, Mainwheel, and Compressor Masks in .svg Format

   By Hoops

   The small ring masks are to go around the brakes on the inside of the main wheels, then apply a complete disk over the top to complete the masking job.
    
   The large circle is for the compressor face.
    
   Cheers,
   Hoops
   

   9 downloads

      (0 reviews)

   0 comments

   Submitted October 3, 2021

4. 

   1/72 Hasegawa Sepecat Jaguar Canopy and Wheel Masks in .svg Format

   By Hoops

   Cheers!
   Hoops
   

   13 downloads

      (0 reviews)

   0 comments

   Submitted October 3, 2021

5. 

   72nd_RAH_66

   By Kits_Kitz

   I cut this for my Italeri kit, but according to Scalemates all of the 72nd kits are the same tool.
   Detail note: the RAH 66 in museums today are seen to have the amber-gold radar absorbing coating on at least the two center panels of the canopy.
   

   0 downloads

   • helicopter
   • rah66
   • (and 1 more)

     Tagged with:

     • helicopter
     • rah66
     • comanche
      (0 reviews)

   0 comments

   Submitted April 29, 2021

6. 

   AerMacchi MB-326 Canopy Masks in 1/72 for Italeri Kit

   By raccarva

   These are masks for Italeri´s 1/72 AerMacchi MB-326 canopy/wheels.
   

   19 downloads

      (0 reviews)

   0 comments

   Updated August 11, 2020

7. 

   Airfix Me 410A-1/U2 & U4 kit #A04066

   By craig b

   Canopy masking for the two versions of the Me 410 by Airfix. Extra clear parts are on the clear parts tree but not designated in the instructions.
   Feedback always appreciated.
    
   Craig
   

   4 downloads

      (0 reviews)

   0 comments

   Submitted January 7

8. 

   Avro Anson (early) masks

   By Mozart

   Complements the late upright version.
   

   31 downloads

      (0 reviews)

   0 comments

   Updated December 29, 2022

9. 

   Avro Anson (late) masks

   By Mozart

   Drawn in 1/48 scale for the new Airfix kit, inside and outside masks.
   Max
   

   27 downloads

      (0 reviews)

   0 comments

   Updated December 29, 2022

10. 

    C-47 Masks for 1/72 Italeri Kit

    By raccarva

    These are windows and wheels masks for Italeri´s C-47 in 1/72. If you find defects, feel free to correct and upload a new version 
    

    29 downloads

    • c-47
    • italeri
       (0 reviews)

    0 comments

    Updated August 11, 2020

11. 

    Canopy Mask for FineMolds 1/72 Short Nose Phantoms

    By GeneK

    Fine Molds currently produces 1/72 long nose (F-4E, F-4EJ, RF-4EJ) as well as short nose (F-4C, F-4J) Phantom kits (with hopefully more variants coming). As concerns canopies, the short nose variants have a longer windscreen as illustrated here , and FineMolds have commendably noted and molded separate clear sprues. 
     
    I have previously posted FM long nose masks here.
     
    I have added an SVG file for use in other cutters such as the Cricut ... or to cut manually.
    

    41 downloads

    • finemolds
    • phantom
    • (and 2 more)

      Tagged with:

      • finemolds
      • phantom
      • f-4
      • 1/72
       (0 reviews)

    0 comments

    Updated September 21, 2021

12. 

    Canopy Masks 1_72 FineMolds Long Nose Phantoms

    By GeneK

    Canopy Masks for the 1/72 FineMolds Long Nose Phantoms (F-4E, F-4EJ, et al). Cut settings on my Cameo 4 using Oramask 810 are: Depth 2, Force 13, Passes 1, Speed 5; and for the cut-through-the-backing border are: Depth 5, Force 15, Passes 2, Speed 5.
     
    The FineMolds kits are the best 1/72 Phantoms on the market.
     
    Gene K
    

    45 downloads

    • f-4
    • phantom
    • (and 2 more)

      Tagged with:

      • f-4
      • phantom
      • finemolds
      • 1/72
       (0 reviews)

    0 comments

    Updated September 16, 2021

13. 

    Canopy Masks for 1/72 Hasegawa F-4

    By GeneK

    Silhouette Studio Canopy Masks for ALL 1/72 Hasegawa "new" Phantom kits released in 1990 and after. Hasegawa does not differentiate between long nose or short nose windscreens as do the new FineMolds kits (the long nose Phantoms have shorter windscreens than the short nose Phantoms).
     
    An SVG file is included for use with other cutters like the Cricut ... or for manual cutting.
     
    Gene K
    

    75 downloads

       (0 reviews)

    0 comments

    Submitted September 19, 2021

14. F-4B Tamiya 1/48 Canopy Mask

    By GeneK

    Included in the Tamiya 1/48 F-4B kit is a printed canopy mask sheet that requires cutting out the individual pieces. This file does that cutting for you.  Hand traced, and fits precisely. Cut settings are for Oramask 810 ... that also work with Tamiya tape.
     
    Gene K
    

    57 downloads

       (1 review)

    0 comments

    Submitted September 12, 2021

15. 

    F-5E Canopy masks for Italeri´s 1/48 Kit

    By raccarva

    These are canopy/wheels masks for Italeri´s 1/48 F-5E Kit.
    

    12 downloads

       (0 reviews)

    0 comments

    Updated August 11, 2020

16. 

    F-5E Canopy masks for Italeri´s 1/72 Kit

    By raccarva

    These are canopy and wheels masks for Italeri´s F-5E 1/2 kit. 
    

    9 downloads

       (0 reviews)

    0 comments

    Updated August 11, 2020

17. 

    F102 Canopy Revell 144.svg

    By MichaelS

    Canopy, wheel, and intake splitter masks for the Revell 1:144 F-102A. This is the mold as used by Arii, Otaki, and Entex. The canopy matches the kit part fairly well, but the frames look oversized for the scale to my eye. These were downscaled from 1:72 and adjusted to fit this kit.
    

    4 downloads

    • 1/144
    • f-102
       (0 reviews)

    0 comments

    Submitted October 17, 2020

18. 

    FineMolds 1/72 F-15 Single Seat svg File

    By GeneK

    SVG  file for folks using other other than Silhouette cutters, or who want to trace/cut manually.
     
    Gene K
    

    9 downloads

       (0 reviews)

    0 comments

    Submitted October 10, 2023

19. 

    FineMolds F-15J 72 scale v6.studio3

    By GeneK

    Canopy plus wheel/spares and Air Refueling masks for new (Sep 2023) FineMolds 1/72 F-15J (and other single seaters to be released (A, C, ...). I'll post two seater masks after kits are released (Dec 2023). 
     
    This weekend I'll also post masks for metal aft fuselage areas, including Turkey Feather nozzles.
     
    Gene K
     
     
    

    7 downloads

       (0 reviews)

    0 comments

    Updated October 10, 2023

20. 

    Front Canopy Masks for Pilot Replicas J 29 Tunnan 1-48

    By flarpen

    Canopy Masks for the front canopy designed or Pilot Replicas J 29 Tunnan in 1/48 scale.
    Studio 3 masks.
    

    4 downloads

    • pilot replicas
    • j 29
    • (and 1 more)

      Tagged with:

      • pilot replicas
      • j 29
      • canopy mask
       (0 reviews)

    0 comments

    Submitted October 2, 2021

21. 

    Hawker Hunter F5 canopy

    By Mozart

    Canopy masks, inside and out for the Hawker Hunter.  The masks were produced specifically for the Echelon Vac form kit, comparisons with the Revell Hunter show that the latter canopy is slightly wider than the Echelon so if used, these masks may need a bit of tweaking.
    

    1 download

    • echelon
       (0 reviews)

    0 comments

    Submitted August 26, 2023

22. Hawker Hunter T7 (Fisher conversion)

    By Mozart

    After a little nudge from Mike C., I've tweaked my rather indifferent first attempts at canopy masks for the Fisher Hunter T7.  It's not an easy mask designing project due a) to the shape of the canopies b) the not too good definition on my canopy between glass and metal framing and c) a slight inconsistency in size for the canopy sections ie left and right of the main canopy and matching sections of the front.  So using these masks comes with a caveat:  they fit well but not perfectly so on the front ones especially you will need a fresh blade in your scalpel to make small adjustments!  Nonetheless, I hope they are useful to those fortunate to have this Fisher conversion.
    Max
    

    4 downloads

       (0 reviews)

    0 comments

    Submitted June 8, 2022

23. 

    Hawker Hurricane Revell new tool

    By Mozart

    Masks as described, outer test fitted and accurate, inner ones are a reduced version of the outer but not test fitted.....over to you. 😄
    

    25 downloads

       (0 reviews)

    0 comments

    Submitted January 23, 2023

24. 

    Mig 31 (AMK)

    By machine_marty

    Two files here. The first is for the canopy sealant (that pink sealant clearly seen on Mig-31's). Also included in that file is the thin white outline on the front glazing.
    The second is the masking of the white sections on the main missiles (sorry, can't remember what they're called, I just know they can be tricky to mask!)
     
    Enjoy
    

    32 downloads

       (0 reviews)

    0 comments

    Submitted August 11, 2020

25. 

    Revell 1/144 Panavia Tornado Canopy mask set

    By killboxscalemodels

    Canopy masks for the Revell 1/144 Tornados (New Tool 2006)
     
    It might work for older Academy/DML kits as well, but not ARII and LS kits
    

    8 downloads

    • 1/144
    • tornado
       (0 reviews)

    0 comments

    Updated September 24, 2020