Canopy Masks
Masks for aircraft canopies, all scales and eras.
29 files
-
Canopy Masks for 1/72 Hasegawa F-4
By GeneK
Silhouette Studio Canopy Masks for ALL 1/72 Hasegawa "new" Phantom kits released in 1990 and after. Hasegawa does not differentiate between long nose or short nose windscreens as do the new FineMolds kits (the long nose Phantoms have shorter windscreens than the short nose Phantoms).
An SVG file is included for use with other cutters like the Cricut ... or for manual cutting.
Gene K
75 downloads
0 comments
Submitted
-
F-4B Tamiya 1/48 Canopy Mask
By GeneK
Included in the Tamiya 1/48 F-4B kit is a printed canopy mask sheet that requires cutting out the individual pieces. This file does that cutting for you. Hand traced, and fits precisely. Cut settings are for Oramask 810 ... that also work with Tamiya tape.
Gene K
57 downloads
0 comments
Submitted
-
Canopy Masks 1_72 FineMolds Long Nose Phantoms
By GeneK
Canopy Masks for the 1/72 FineMolds Long Nose Phantoms (F-4E, F-4EJ, et al). Cut settings on my Cameo 4 using Oramask 810 are: Depth 2, Force 13, Passes 1, Speed 5; and for the cut-through-the-backing border are: Depth 5, Force 15, Passes 2, Speed 5.
The FineMolds kits are the best 1/72 Phantoms on the market.
Gene K
45 downloads
0 comments
Updated
-
Canopy Mask for FineMolds 1/72 Short Nose Phantoms
By GeneK
Fine Molds currently produces 1/72 long nose (F-4E, F-4EJ, RF-4EJ) as well as short nose (F-4C, F-4J) Phantom kits (with hopefully more variants coming). As concerns canopies, the short nose variants have a longer windscreen as illustrated here , and FineMolds have commendably noted and molded separate clear sprues.
I have previously posted FM long nose masks here.
I have added an SVG file for use in other cutters such as the Cricut ... or to cut manually.
41 downloads
0 comments
Updated
-
Mig 31 (AMK)
Two files here. The first is for the canopy sealant (that pink sealant clearly seen on Mig-31's). Also included in that file is the thin white outline on the front glazing.
The second is the masking of the white sections on the main missiles (sorry, can't remember what they're called, I just know they can be tricky to mask!)
Enjoy
32 downloads
0 comments
Submitted
-
0 comments
Updated
-
C-47 Masks for 1/72 Italeri Kit
By raccarva
These are windows and wheels masks for Italeri´s C-47 in 1/72. If you find defects, feel free to correct and upload a new version
29 downloads
0 comments
Updated
-
1/32 Bf110 Canopy masks
By IainM
Hi all
Made up some masks for the Dragon 1/32 Bf110. These should work on a C/D/E/F kit, and if you have a G kit, this will do from the armored windscreen all the way through to the Bordfünker position. The masks might need very minute adjustments to scale, check your fit first. Oramask or something like that is great for straight pieces, you'll probably need to cut on Kabuki for the curved pieces, Oramask tends to lift away quickly on concave or convex pieces.
28 downloads
0 comments
Submitted
-
Avro Anson (late) masks
By Mozart
Drawn in 1/48 scale for the new Airfix kit, inside and outside masks.
Max
27 downloads
0 comments
Updated
-
Hawker Hurricane Revell new tool
By Mozart
Masks as described, outer test fitted and accurate, inner ones are a reduced version of the outer but not test fitted.....over to you. 😄
25 downloads
0 comments
Submitted
-
AerMacchi MB-326 Canopy Masks in 1/72 for Italeri Kit
By raccarva
These are masks for Italeri´s 1/72 AerMacchi MB-326 canopy/wheels.
19 downloads
0 comments
Updated
-
1/72 Hasegawa F-104 Canopy and Wheel Masks, .svg Format
By Hoops
Uploading in the canopy mask in .svg Format
Cheers,
Hoops
15 downloads
0 comments
Submitted
-
1/72 Hasegawa Sepecat Jaguar Canopy and Wheel Masks in .svg Format
By Hoops
Cheers!
Hoops
13 downloads
0 comments
Submitted
-
F-5E Canopy masks for Italeri´s 1/48 Kit
By raccarva
These are canopy/wheels masks for Italeri´s 1/48 F-5E Kit.
12 downloads
0 comments
Updated
-
F-5E Canopy masks for Italeri´s 1/72 Kit
By raccarva
These are canopy and wheels masks for Italeri´s F-5E 1/2 kit.
10 downloads
0 comments
Updated
-
1/72 Hasegawa Harrier GR.3 Canopy, Mainwheel, and Compressor Masks in .svg Format
By Hoops
The small ring masks are to go around the brakes on the inside of the main wheels, then apply a complete disk over the top to complete the masking job.
The large circle is for the compressor face.
Cheers,
Hoops
9 downloads
0 comments
Submitted
-
FineMolds 1/72 F-15 Single Seat svg File
By GeneK
SVG file for folks using other other than Silhouette cutters, or who want to trace/cut manually.
Gene K
9 downloads
0 comments
Submitted
-
Revell 1/144 Panavia Tornado Canopy mask set
Canopy masks for the Revell 1/144 Tornados (New Tool 2006)
It might work for older Academy/DML kits as well, but not ARII and LS kits
8 downloads
0 comments
Updated
-
T-27 Tucano canopy/wheels masks for 1/72 kits
By raccarva
These are 1/72 canopy/wheels masks for T-27 Tucano. Should fit both Premiere and Airfix kits.
7 downloads
0 comments
Updated
-
FineMolds F-15J 72 scale v6.studio3
By GeneK
Canopy plus wheel/spares and Air Refueling masks for new (Sep 2023) FineMolds 1/72 F-15J (and other single seaters to be released (A, C, ...). I'll post two seater masks after kits are released (Dec 2023).
This weekend I'll also post masks for metal aft fuselage areas, including Turkey Feather nozzles.
Gene K
7 downloads
0 comments
Updated
-
T-27 Tucano canopy/wheels masks for 1/48 kits.
By raccarva
These are 1/48 canopy/wheels masks for T-27 Tucano.
6 downloads
0 comments
Updated
-
Tamiya Bf109 E-4/7 canopy 1/48
By craig b
Canopy masks for Tamiya Bf109 E-4/7, kit #61063. Appreciate any feedback.
6 downloads
0 comments
Submitted
-
F102 Canopy Revell 144.svg
By MichaelS
Canopy, wheel, and intake splitter masks for the Revell 1:144 F-102A. This is the mold as used by Arii, Otaki, and Entex. The canopy matches the kit part fairly well, but the frames look oversized for the scale to my eye. These were downscaled from 1:72 and adjusted to fit this kit.
4 downloads
0 comments
Submitted
-
Front Canopy Masks for Pilot Replicas J 29 Tunnan 1-48
By flarpen
Canopy Masks for the front canopy designed or Pilot Replicas J 29 Tunnan in 1/48 scale.
Studio 3 masks.
4 downloads
- pilot replicas
- j 29
- (and 1 more)
0 comments
Submitted
-
Hawker Hunter T7 (Fisher conversion)
By Mozart
After a little nudge from Mike C., I've tweaked my rather indifferent first attempts at canopy masks for the Fisher Hunter T7. It's not an easy mask designing project due a) to the shape of the canopies b) the not too good definition on my canopy between glass and metal framing and c) a slight inconsistency in size for the canopy sections ie left and right of the main canopy and matching sections of the front. So using these masks comes with a caveat: they fit well but not perfectly so on the front ones especially you will need a fresh blade in your scalpel to make small adjustments! Nonetheless, I hope they are useful to those fortunate to have this Fisher conversion.
Max
4 downloads
0 comments
Submitted